Solaris: nvalias

# format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c1t0d0
          /pci@0/pci@0/pci@2/scsi@0/sd@0,0
       1. c1t1d0
          /pci@0/pci@0/pci@2/scsi@0/sd@1,0
       2. c4t60060E80056F110000006F11000060D4d0
          /scsi_vhci/ssd@g60060e80056f110000006f11000060d4
Specify disk (enter its number):


{0} ok printenv boot-device
boot-device =           /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a disk net
{0} ok nvalias root-mirr /pci@0/pci@0/pci@2/scsi@0/disk@1,0:a
{0} ok devalias
root-mirr                /pci@0/pci@0/pci@2/scsi@0/disk@1,0:a
ttya                     /ebus@c0/serial@0,ca0000
nvram                    /virtual-devices/nvram@3
net3                     /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1
net2                     /pci@0/pci@0/pci@1/pci@0/pci@3/network@0
net1                     /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1
net0                     /pci@0/pci@0/pci@1/pci@0/pci@2/network@0
net                      /pci@0/pci@0/pci@1/pci@0/pci@2/network@0
cdrom                    /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/device@4/storage@0/disk@0:f
disk3                    /pci@0/pci@0/pci@2/scsi@0/disk@3
disk2                    /pci@0/pci@0/pci@2/scsi@0/disk@2
disk1                    /pci@0/pci@0/pci@2/scsi@0/disk@1
disk0                    /pci@0/pci@0/pci@2/scsi@0/disk@0
disk                     /pci@0/pci@0/pci@2/scsi@0/disk@0
scsi                     /pci@0/pci@0/pci@2/scsi@0
virtual-console          /virtual-devices/console@1
name                     aliases
{0} ok boot

HPUX: How to check hpux ilo firmware version

<>hpiLO-> show
status=0
status_tag=COMMAND COMPLETED


/
  Targets
    system1
    map1
  Properties
  Verbs
    cd version exit show


<>hpiLO-> show /map1

status=0
status_tag=COMMAND COMPLETED


/map1
  Targets
    firmware1
    accounts1
    log1
    enetport1
    dhcpendpt1
    dnsendpt1
    gateway1
    dnsserver1
    dnsserver2
    dnsserver3
    dhcpserver1
    settings1
    config1
    snmp1
    oemhp_dircfg1
    oemhp_vm1
    vlan1
    oemhp_ssocfg1
  Properties
    name=iLO 3 Advanced
    license=3368NY7M2BQGKTNMLDZ8KZLLH
  Verbs
    cd version exit show reset set oemhp_ping



hpiLO-> show firmware1
status=0
status_tag=COMMAND COMPLETED


/map1/firmware1
  Targets
  Properties
    version=1.10
    date=Jul 26 2010
  Verbs
    cd version exit show load set



hpiLO->

to upgrade


How to upgrade the firmware using SSH PDF Print E-mail
Written by Carlo Cacciafesta  
Thursday, 07 January 2010 13:35
How to upgrade the firmware using SSH

The following commands can be used to upgrade the firmware on an HP iLO or iLO2 interface. This procedure is particularly useful when the iLO stops working properly and it's not accessible from the server or via HTTP(S).

Use the following procedure:

    * Use SSH to access the iLO device
    * Log in to the iLO using administrative credentials
    * Type the following command and press enter: "load -source http://ip_address/path/imagename.bin /map1/firmware"
          o  Example: "load -source http://192.168.0.1/ilo2_180.bin /map1/firmware"
    * The interface will download the new image and will reset itself
    * To check the firmware version, log in again using SSH and enter the following command: "show /map1/firmware version"

Redhat: Find network device

[root@ devices]# du -a . | grep net
0       ./vmbus_0_0/vmbus_0_4/net:seth0
0       ./pci0000:00/0000:00:0a.0/net:eth0
[root@ devices]# pwd
/sys/devices
[root@ devices]#

Solaris: Restricted ftp access

groupadd partsftp
useradd -c "F1 performance project" -d /root/home/partsftp -g partsftp -m -s /usr/bin/false partsftp
svcadm -v enable ftp



Change user's home directory to /u01/network:
Code:
usermod -d /u01/network ftp_user

Then add:
Code:
restricted-uid ftp_user
to /etc/ftpd/ftpaccess file.


server1# vi /etc/shells
"/etc/shells" [New file]
/usr/bin/false



    deny-uid uid-range [uid-range...]
     deny-gid gid-range [gid-range...]
     allow-uid uid-range  [uid-range...]
     allow-gid gid-range [gid-range...]



/etc/ftpd/ftpaccess example
--------------
.
.
.
. omitted

# limit-time    anonymous       30
# limit         anonusers       10      Wk0730-1800       /etc/ftpd/toomany.msg
# limit         anonusers       50      SaSu|Any1800-0730 /etc/ftpd/toomany.msg
restricted-uid partsftp
allow-uid partsftp
deny-uid *
defumask 022
server1#